How to Use Samsung’s Wireless PowerShare Feature to Wirelessly Charge Other Devices

Did you know that your Galaxy phone can be used for charging other devices and phones? We’ll demonstrate how.

In This Article

KEY TAKEAWAYS

Samsung Galaxy phones have a feature dubbed Wireless Power Share that allows them to wirelessly charge other devices including smartwatches and earbuds as well as smartphones, like iPhones.
Wireless Power Share is able to deliver as much as 4.5W in power however it’s a better choice for charging devices rather than smartphones due to the low efficiency of wireless charging.
Wireless Power Share is accessible on all modern Samsung flagships and is activated through using the Settings app. It will stop sharing power once you Galaxy phone’s battery is at 30% or lower.

When you are spending a significant amount of time outside you might be worried that your earbuds, smartwatch, or a second phone running out of batteries is a nightmare. If you have any of the top Samsung phones you can swiftly replenish the battery using Wireless Power Share.

Here’s everything you need be aware of Samsung’s Wireless Power Share feature on Samsung Galaxy phones.

What Is Wireless Power Share, and Which Samsung Phones Support It?

Wireless Power Share is Samsung’s version of reverse wireless charging for smartphones. It transforms the Galaxy phone into an wireless charging which can be used to charge wirelessly earbuds or smartwatches, as well as phones that support it. Qi wireless charging protocol, which includes Apple’s iPhones and Air Pods.

Wireless Power Share can deliver upwards of 4.5W in power. However, because wireless charging isn’t the most efficient method the number doesn’t work in actual usage. Therefore, Wireless Power Share is well-suited to charging earbuds and smartwatches or any other Bluetooth accessories.

Samsung’s Wireless Power Share feature has been made available to all Samsung flagship phones since the year 2019. The following smartphones:

Galaxy Note 10 series
Galaxy Note 20 series
Galaxy Z Flip series
Galaxy Z Fold series
Galaxy S10 series
Galaxy S20 series
Galaxy S21 series
Galaxy S22 series
Galaxy S23 series

How to Enable Wireless Power Share on Your Galaxy Phone

It is not enabled by default on every Galaxy devices by default. Here’s how you can enable it:

Start Settings. Open the settings app.
Select Battery. If you are unable to locate it, look it up instead.
Scroll down to select Wireless power sharing..
Turn the switch that is next switch to off.

If the toggle is greyed out on your phone this is because Samsung won’t allow Wireless Power Share if your phone has less than 30% charge. Also, make sure to recharge your phone and try again.

Also, Samsung has set the Wireless Power Share feature to automatically end sharing power once the battery in your Galaxy phone is 30 percent. While this is a reasonable amount however, if you wish to increase or decrease the amount then you are able to do so.

To do this disable wireless power sharing. Wireless Power Sharing feature. After that, click on the Battery Limit at the lower right of the menu. There, select a cut-off that is based on what you like. Then, tap OK.

How to Use Wireless Power Share to Charge Other Devices

After you’ve activated Wireless Power Share on your Galaxy device, here’s how you can utilize the power to recharge other gadgets:

Place the Galaxy phone on the table with your face down.
Place the phone or accessory you wish to charge to the reverse side of the Samsung phone. Set your phone one side in landscape, and the other in portrait to get a greater connectivity.

If you’ve aligned your coils on both devices there will be a slight vibration as well as you’ll notice that your Galaxy phone will begin charging another device.

If the charging does not begin then try aligning the devices once more. If you have a case installed on your phone, take it off and attempt again. Also, if you find that you find that your Galaxy phone is getting low on battery You can connect the charger to recharge it while simultaneously charging another device.

When you’ve reached the point where you have enough juice on the accessory or other phone Separate the two devices and your Galaxy phone will stop charging.

How to Disable Wireless Power Share on Your Galaxy Phone

Samsung has created Wireless Power Share in a way that it will stop the power sharing to conserve battery power when the following conditions are fulfilled:

The battery level of your Galaxy phone is 30% or lower.
You either make or receive a telephone call.
Open the Camera application.
It’s been a minute since you’ve turned off sharing power and haven’t put a different device in charge.

In addition the above, you can disable Wireless Power Share manually by heading back to Settings > Battery. Choose Wireless Power Sharing and then turn off the switch.

You can turn off Wireless Power Share from the Quick Settings panel, too. Simply modify in the Quick Settings section of your Samsung smartphone and include the Wireless Power Sharing button to at least one page. After that, press the button to begin the process or end it. Wireless Power Sharing.

Use Wireless Power Share Sparingly

The Wireless Power Share is a great feature available on Galaxy phones that is designed to be used occasionally or when your device or smartphone is in desperate need of power. It’s not a typical wireless charger you can utilize every day, as it is extremely slow to charge and can produce a significant amount of heat. We recommend that to use it in moderation.